What is a DIY Umbrella Planter Stand
This planter stand is a unique way to set up an umbrella stand on your patio. Secure your patio umbrella into a planter by adding cement to make sure it stays stable. This will give you a one of a kind umbrella base.
Before You Begin
Before you start making your own DIY umbrella stand planter, take a moment to consider a few factors:
Weight of the Umbrella
The planter must support the umbrella's weight well so it does not topple over. Use a larger planter to provide a good base.
Size of the Umbrella
Use a PVC pipe to connect the base to the umbrella. The diameter of the pipe should be wider than the umbrella for a sturdy grip.
Drainage for the Plants
The umbrella might be the focus of this project, but you should pay attention to the planter too. Drainage holes can prevent the plants from getting waterlogged. You could also add a bunch of rocks in the planter for better drainage.
Material for the Base
While using concrete is the most common way to secure the umbrella to the planter, there are other ways too. Concrete blocks or a terracotta pot filled with rocks can work just as well.
Ensure safety when working with concrete. Wear necessary safety equipment like glasses and gloves.
Style of the Planter
Planters are available in a wide variety of styles and designs. Choose a size that complements your backyard. Select from materials like clay, resin, ceramic and plastic. To make the best DIY umbrella planter stand, get one with an attached saucer or drainage holes. This will reduce your work and make this project more convenient.
DIY Umbrella Planter Stand Ideas
While this project might require some effort and planning, it is equally rewarding for DIY enthusiasts. It also becomes more convenient if you have some of the required materials on hand. It can cut down the costs of buying a pre-made one and help you create something that is uniquely yours. Customization is also convenient since you can choose an umbrella and pot that complements your outdoor décor.
DIY Umbrella Table Planter
This is a relatively simple project if you have a table with an umbrella attached. This is the perfect way to keep your floral arrangements centered despite the umbrella rising out from the middle of the table. The basic idea is to drill a hole in your outdoor table and put your umbrella through it. Measure the diameter of your umbrella post and mark it on the table. Then, drill a hole through the marking. Finally, put your umbrella post through the center of the table. You can then decorate the table by adding small plants around the pole to cover the hole and make it look aesthetic.
DIY Cantilever Umbrella Planter Stand
A cantilever or offset umbrella is characterized by a clear space under the canopy without a center pole. It has a freestanding pole on the side to support the umbrella. This is ideal since a pole in the middle can sometimes come in the way. Making an umbrella planter stand with a cantilever umbrella might be tricky. You will require a much sturdier base. Using a heavy and wide planter with a concrete base might be able to offset the weight. Fill it with gravel, rocks or cinder blocks for added stability. You could use a metal bracket to attach the umbrella to the side of the planter.
DIY Painted Umbrella Planter Stand
If you already have an umbrella planter stand and want to give it a little update, this idea might be the one for you. When the umbrella is in good condition, but the paint has faded, you could give it a fresh coat of paint spray to reinvigorate its appearance. Paint shades like light yellow or blue are great options for a backyard.
DIY Market Umbrella Planter Stand
A market umbrella is simple and symmetrical, making it ideal for a DIY project. They have a straight pole at their center. Market umbrellas are often available with a dining table or as a standalone umbrella. To make this, you require a planter with drainage holes. Cut the PVC pipes per your needs and stick them with duct tape to the bottom of a bucket placed inside the planter. Pour the prepared concrete mix into the bucket and let it cure completely. Once it is all done, you can add potting soil and plant your flowers. Insert your umbrella pole into the PVC pipe stand. Now, you can enjoy the shade of your DIY umbrella planter stand.
DIY Umbrella Planter Stand on Wheels
Moving your umbrella planter stand wherever you need it to provide shade sounds appealing. If you have already made a DIY umbrella stand planter, all you need to do is get a plant caddy. These are convenient saucers or stands that are fitted with wheels. Place your planter onto them and move it around. These are available in materials like metal planter, plastic planters and wood planters and in shapes like round planters and rectangle planters.
Match the Style of Your Garden
You can customize both the planter and the umbrella when making this DIY umbrella planter stand. Select a planter style that complements the design of your home. Whether you get a traditional ceramic planter or a modern resin one, each has their own unique appeal. You can go all out when selecting umbrella colors and patterns as well. Umbrella canopies are also available in many shapes like octagon, square, hexagon, among others.